Rod End Bearings by Structure
Loader slot, 2-piece, 3-piece, injection molded, which one is a better one? It’s hard to say, let’s just talk about the structure, then you may have an idea to choose a proper rod end.
Loader slot rod end bearing is for vibratory or static loads applications.
The most popular structure for racing application is the fully swaged 2-piece design. This economy rod end has good radial or pull strength along with good axial strength.
3-Piece rod end bearings is a kind of precision rod end, it can be made of different material to match application.
They are strong and tight fitting. And the injection molded rod end bearing normally for low load, moderate oscillation applications.
Below is the list of SYZBEARING Rod End Bearings by Structure
| Rod End Model No. | Rod End Structure | Male Thread | Female Thread | Inch/Metric Size | Applications |
| CM | 2-Piece | LH/RH | Inch | The most popular structure for racing application is the fully swaged 2-piece design. This economy rod end has good radial or pull strength along with good axial strength. | |
| CF | 2-Piece | LH/RH | Inch | ||
| CM-M | 2-Piece | LH/RH | Metric | ||
| CF-M | 2-Piece | LH/RH | Metric | ||
| PCM | 2-Piece | LH/RH | Inch | ||
| PCYM | 2-Piece | LH/RH | Inch | ||
| PCYF | 2-Piece | LH/RH | Inch | ||
| SCM | 2-Piece | LH/RH | Inch | ||
| SCF | 2-Piece | LH/RH | Inch | ||
| SCM-M | 2-Piece | LH/RH | Metric | ||
| SCF-M | 2-Piece | LH/RH | Metric | ||
| ALJM | 3-Piece | LH/RH | Inch | 3-Piece rod end bearings is a kind of precision rod end, it can be made of different material to match application. They are strong and tight fitting. | |
| ALJF | 3-Piece | LH/RH | Inch | ||
| ALRSM | 3-Piece | LH/RH | Inch | ||
| JM | 3-Piece | LH/RH | Inch | ||
| JF | 3-Piece | LH/RH | Inch | ||
| VM | 3-Piece | LH/RH | Inch | ||
| VF | 3-Piece | LH/RH | Inch | ||
| JM-M | 3-Piece | LH/RH | Metric | ||
| JF-M | 3-Piece | LH/RH | Metric | ||
| SA..TK | 3-Piece | LH/RH | Metric | ||
| SI..TK | 3-Piece | LH/RH | Metric | ||
| JMX | 3-Piece | LH/RH | Inch | ||
| JFX | 3-Piece | LH/RH | Inch | ||
| JMX-M | 3-Piece | LH/RH | Metric | ||
| JFX-M | 3-Piece | LH/RH | Metric | ||
| PM | Injection Molded | LH/RH | Inch | Injection molded rod end bearing normally for low load, moderate oscillation applications. | |
| PF | Injection Molded | LH/RH | Inch | ||
| MPM | Injection Molded | LH/RH | Metric | ||
| MPF | Injection Molded | LH/RH | Metric | ||
| AM | Load Slot | LH/RH | Inch | Loader slot rod end bearing is for vibratory or static loads applications. | |
| AF | Load Slot | LH/RH | Inch | ||
| EXM | Load Slot | LH/RH | Inch | ||
| EXF | Load Slot | LH/RH | Inch | ||
| XM | Load Slot | LH/RH | Inch | ||
| XF | Load Slot | LH/RH | Inch | ||
| MXM | Load Slot | LH/RH | Metric | ||
| MXF | Load Slot | LH/RH | Metric |
